Front Suspension, Strut and Cradle for 2022 Jeep Grand Cherokee
Mopar M8x1.25. Exhaust Bracket to Underbody. Hinge Attaching. Hinge to Roof.
Mopar M12x1.25. Rack & pinion tie rod to knuckle. M12x1.75. Damper to Inner Tie Rod. Steering Damper to Linkage. Steering damper to rod& link assy. Watts Link to Bellcrank. Front shock to top mount nut.
Mopar Suspension Shock Absorber Kit, Right
SUSPENSION
Mopar Suspension Shock Absorber Kit, Right
SUSPENSION
Mopar Suspension Shock Absorber Kit, Left
SUSPENSION
Mopar Suspension Shock Absorber Kit, Left
SUSPENSION
Mopar Hex Head Screw And Washer
Front Shock Clevis to Shock Tube.
Mopar Hex Head Screw And Washer
Upper Control Arm to Body. Front pedestal to crossmember. Steering Gear to Crossmember. Body 27. M12x1.50x80.00.
Mopar Front Knuckle, Right
Engine Mount To Engine Mount Bracket. M10x1.25x76.50. Uca to knuckle. If the spindle does not contain a press nut, then Items #10 & #11, will be used together. Upper Control Arm to Knuckle. If the spindle does not contain a press nut, then Items #17 , will be used together. Absorber To FEM. Starter motor to block. Starter to Transmission.
Mopar Front Knuckle, Right
M10 x 1.25. If the spindle does not contain a press nut, then Items #10 & #11, will be used together. Upper Control Arm to Knuckle. If the spindle does not contain a press nut, then Items #17 , will be used together. Uca to knuckle. Link to control arm. Link to Stabilizer Bar.
Mopar Hex Drive Nut, Left
M10x1.5. AWD Models have a Weld Nut in Place. Shear plate to cradle plp bkt. Upper Control Arm to Knuckle.
Mopar Hex Head Screw And Washer
Uca to knuckle. If the vehicle has a press nut on the spindle for the UCA, only bolt 06512994AA will be used. Upper Control Arm to Knuckle.
Mopar Hex Flange Head Bolt, Left
M12x1.75x60.00. Engine Oil Cooler Bracket To Engine Mount Bracket. Bearing to Knuckle Attaching. Bearing Assembly to Knuckle. Link to Frame. Bearing Hub to Knuckle.
Mopar Handling Link To Knuckle. Lower Arm to Knuckle. Tension Link to Knuckle.
